|
 |
|
Conservation
| Conserved Flags |
Flag of the Month |
Resources | Posters
| Exhibits
Under the Microscope in the Conservation Lab:
Some examples of current conservation treatments
All treatments are performed by textile conservators in
accordance with the Code of Ethics of the American Institute for Conservation,
found at http://aic.stanford.edu [link
opens new window]

|
Conservation vacuuming removes particulate soils that have
accumulated during the flag’s lifetime. During conservation vacuuming,
a sample of the dirt on the flag is taken. If desired, this sample can
be analyzed
to learn the composition of the soils, which could give insight into a
flag’s history (2005.103). |
Combination soils – Many of the flags in storage now
have a combination of small particulate and sooty soils. The wool flags
in particular exhibit this type of soiling. We have found that a two-step
process works best to clean these flags, after testing to be sure dye loss
will not occur. First, the flag is cleaned with a solvent to loosen and
begin to remove the sooty (oily) soils. Second, the flag is cleaned with
a surfactant (detergent) in water to remove the loosened and water-soluble
soils using a suction table. |

|

|
Stabiltex® encapsulation – this
is a stitching treatment, using a sheer, polyester fabric, called Stabiltex®.
We treated one flag in this manner for an exhibition, encapsulating the
red and white
sections of a French National pattern flag from the Civil War.
In contrast to the earlier netting treatments in which the extensive stitching
pierced the flags, the Stabiltex® was stitched to itself where the
flag had losses, so no new holes were made and fewer stitches were used
overall. |
| Adhesives - Although once supple, painted areas on the
flags are now brittle and fragile. Many flags have lost vast areas of paint,
while others have large splits within the painted areas. To prevent further
loss of the flags and their historical information, conservation-quality
adhesive treatments have been used to keep the fragile pieces of flags
together.
Small pieces of Stabiltex® coated with an adhesive have been nicknamed “bandaids” and
are used to hold pieces together. |

painted area before treatment (2001.0130).
|

painted area after treatment (2001.0130).
|
When the painted area is separated from the flag and/or
extremely fragmented, the entire painted area will be lined with adhesive-coated
Stabiltex®. To date, only three flags in the collection have required
this treatment.
|

Flag before treatment, painted center off to left (2002.0155)
|

Flag after treatment, front view (2002.155)
|

Flag after treatment, back view showing Stabiltex® in center (2002.155)
|
Back to What are we doing
to save New York State's Battle Flags?
New York State Division of Military and Naval Affairs: Military
History
Last modified:
May 10, 2006
URL: http://www.dmna.state.ny.us/historic/btlflags/conservation/conservationDoingExamples.htm
|
|